Easy Solutions: Netgear Nighthawk Keeps Dropping Internet

nighthawk router set up

Nighthawk WiFi routers are the finest piece of technology known for delivering top-notch networking speeds. Just connect them to modems, tweak a few settings and you are good to go. However, a few users have complained that they witness dropping connections even after a successful Nighthawk router set up. By any chance, if you are also experiencing the same problem, the information given in this write-up can be helpful. Read on.

Firstly, Have a Look at the Router-Modem Connection

Dropping connections might be an outcome of a weak link between the router and modem. Perhaps the cable connecting them is damaged. Therefore, have a look at the same. Hundred to one-shots, if our assumption has already become a reality, you are suggested to use a new RJ45 cable as its substitute.

The newly employed cable is supposed to be non-damaged. Apart from this, you must ensure that the cable is linked to the correct ports (i.e. the router’s Internet port and the modem’s LAN port). Furthermore, you must know that using a new cable won’t bring you any benefit if you connect your devices loosely. Be very sure to create a finger-tight connection.

Reduce Router-Modem Gap [If Connection is Wireless]

A lot of users opt to connect their Netgear WiFi routers and modems using a wireless source so that they can avoid the mess of wires. In case you have also connected your devices using a wireless mode of connection, then you have to take special care of the distance separating them.

The router-modem distance needs to be optimal. If it is too much, then your devices won’t be able to communicate properly and no internet issue may arise. However, if you keep your devices too close, then there are chances that the WiFi signals will clash.

Just in case the Netgear Nighthawk keeps dropping connection even after working on the router-modem connection, you need to walk through the techniques mentioned in the next section.

Fixed: Netgear Nighthawk Keeps Dropping Internet

I. Power Cycle the Router

If your router keeps dropping the internet connection, then your router might be demanding some rest. That may happen if you keep using the router 24 hours a day. Yes, we agree that Netgear routers are capable of delivering faster WiFi speeds throughout the day. But, being parts of the technical realm, they can also fall victim to technical glitches.

The best way to get the technical glitches resolved is a simple power cycle. Therefore, we suggest you pull the router’s power adapter out of its respective outlet. If possible, try to remove the Ethernet cable connecting it to the modem. Now, you are required to wait for 30 minutes. Once done, you need to do the exact opposite of what you’ve done before rest.

II. Upgrade the Firmware

Updating the router’s firmware via the Netgear Nighthawk app or the routerlogin.net web URL can also help you fix the problem. There are times when a networking device starts behaving weirdly just because it lacks the latest firmware version. For your information, firmware is a kind of software that looks after the functions to be performed by the router. If it is outdated, then facing problems is a common thing.

To update the WiFi router, you need to launch the Nighthawk app on the mobile phone connected to the network of the router. Log in to the app using the Netgear account details and locate the Firmware Update option. Tap Check Now. Wait till your router scans for a firmware update. If a new firmware is available, follow the on-screen instructions to update it.

III. Reduce the Network Traffic

There are times when the incoming traffic to the Netgear router increases. As a result, WiFi speeds decrease and internet connection keeps dropping. It happens when either you’ve connected too many networking devices to the WiFi of your Nighthawk router or someone has broken into the WiFi network.

To do away with the problem, you are suggested to disconnect those devices that don’t require internet access 24×7. You can also log in to the router to check if an unauthorized user is connected to the network. If yes, then you are suggested to block it.

Summing Up

Struggling with the Netgear Nighthawk keeps dropping internet connection issue can be annoying as it halts the completion of numerous online tasks. Thus, getting rid of it is necessary. From the discussion above, it is very clear that weak router-modem connection, technical glitches, outdated firmware, and heavy networking traffic can be the reason behind the issue.

Considering that you’ve read them carefully, it is expected that you will be able to fix it easily. However, the option of resetting the router must be chosen in case nothing works in your favor. You can do so by pressing the Reset button located on the router with the help of a sharp object. However, do not forget to set up the router again after resetting it.

And there is a also a helping article for you to read about Mywifiext.net Setup.

Leave a Reply

Your email address will not be published. Required fields are marked *