Ultimate Guide to Connect Wavlink Extender to Router

Wavlink WiFi extender setup

In this technology era, the Wavlink range extender is the best networking device. These devices have always provided a flawless internet experience. If you are struggling with a low WiFi signal and you want to enjoy high-speed internet then perform a Wavlink WiFi extender setup. Just in case, you don’t know how to connect a Wavlink extender to a router then don’t worry. You are in the right place where you should be. Here, we’ll talk about how to connect the devices step-by-step. So let’s get started right away.

Methods to Connect Wavlink Extender to Router

There are two ways to connect the Wavlink range extender to the host router. You can select any of the methods which is easier for you.
I. Using Manual Method
II. Using WPS Button

Steps to Connect Extender to Router via WPS Button

The very first method to connect the Wavlink range extender to the router is by using the WPS button.
Before you begin, be sure that the Wavlink WiFi extender and home router are powered on. Besides this, also confirms that they are located within the range.

  • First of all, look for the WPS button on both networking devices. The button is typically labeled WPS.
  • Once you find the button, hold or press it on your main router.
  • Thereafter, wait for a little while until the WPS LED light gets stabilized. In this way, your WiFi router is activated.
  • Now, locate and press the WPS button on the wireless range extender.
  • Wait for a couple of seconds until the WPS light turns on your extender. This activates the range extender.
  • As soon as the WPS mode is activated on both wireless devices, they will automatically search for each other and establish a secure connection.
  • Hold on for a little while, till the WPS LED lights turn on both devices.

In this manner, you can easily connect the Wavlink wireless range extender to the home router. Apart from this method, you can also use the manual method to connect the wireless range extender to the host router. If you are not aware of how to connect the WiFi devices then refer to the next section.

Steps to Connect Extender to Router via Web GUI

The approach to connect the Wavlink extender to the router using this manual method is straightforward. If you are not aware of how to connect wireless devices then follow the steps given below:

I. Power on Your Extender

Initially, plug the power adapter of the WiFi extender into the well-maintained power socket and turn on the switch. To avoid any issues, make sure that your range extender receives a fluctuation-free power supply. Just in case the electrical outlet is damaged insert the extender into other sockets.

II. Connect the Wireless Devices

Now, take a quality Ethernet cable and connect the extender to the host router. Be sure that the Ethernet cable connection is finger-tight. On the off chance, the Ethernet cable you use to connect the WiFi devices is damaged, replace it immediately with a new one.

III. Run an Internet Browser

Once a strong connection is established between the wireless devices, switch on your smart device such as a laptop, computer, or tablet. Thereafter, launch a web browser. You can select any browser of your choice. Make sure that whatever browser you choose it is updated to its latest version.

IV. Access the Web Address

Next, go to the location bar of the browser and type the default web URL. The default web address is wifi.wavlink.com. Apart from this, you can also use an IP address (it may vary from model to model) to access the login page.

V. Input the Admin Credentials

As soon as you press the Enter key, the Wavlink extender login window will come into view. Here fill up the default login details and click log in. Be careful while entering a username or password. The reason is they are case-sensitive. Just in case, you are not sure about the username or password then take the help of the user manual.
In this manner, you can connect the Wavlink range extender to the host router using a web interface in a hassle-free way. Apart from this, to improve the speed of the device don’t forget to install the Wavlink drivers.

In the End

That’s it! We conclude our guide on how to connect the Wavlink range extender to the host router. We believe that with the help of this article, you can easily connect wireless devices in a trouble-free way. If you liked reading this article and want others to learn about what you did, do share it with your fellow readers via the comment section. Thank you for reading the post.